1.Special Features:
● Underground solar road studs
● High-temperature resistance battery and circuit,can be used on the equator
● 10MM thickness PC cover and fully epoxy glue inside,weight resistance in static more than 38tons
● Diam 10mm high brightness LED,Visual Distance more than 1000meters
● Protect Level IP68,Plastic waterproof circle and silicon glue for waterproof
● Silver coating aluminum casing and nice design
| Model | CS-SR-815 | Solar Panel | 2.5V/220MA mono-crystalline |
| Storage Components | 1.2V/1200MAH High temperature NI-MH Battery | Lighting Time | 100h after fully charged |
| Work mode | Flashed for 120times per minute or Stable | LED Color |
Red,Yellow,Blue,Green,White |
| LED Qty | 3PCS Diameter 10mm High Brightness LED per side | Visual Distance | ＞1000meters |
| Life Span | 3-5Years | Work Temperature | -20℃～+80℃ |
| Protect Level | IP68,Can work under water | Material | Anti-UV PC+silver coating Aluminum casing |
| Weight | 820g | Weight Resistance in static | ＞38 Tons |
| Products Size | Diamter 125mm,Height 50mm | Package | Carton size 40*28*25.5CM,24pcs per carton |
● Close the road
● Check if the solar stud charges and discharges normally
● Identify the place for installation
● Dig the hole for solar road studs
● Inject the epoxy glue into the hole and place the solar road studs into the hole
● Fix the wing with screws to ensure the solar road studs and the ground in the same level
● Wait 8 hours for glue drying before open the road
CS-JD200-3-PM3
CS-JD400-3-PM3
137mm diameter 6 LED buried solar LED road stud
120mm diameter 6 LED buried solar LED road stud
120mm diameter 8 LED buried solar LED road stud
A LED solar road stud with a cast aluminum shell and built-in hi-temperature ni-mh battery.
